Stormworks: Build and Rescue

Stormworks: Build and Rescue

Ei tarpeeksi arvosteluja
A-10C Thunderbolt II "Warthog"
   
Palkinto
Lisää suosikkeihin
Lisätty suosikkeihin
Poista suosikeista
Tunnisteet: v1.0.18
Tiedostokoko
Julkaistu
Päivitetty
1.673 MB
29.8.2020 klo 2.57
14.10.2020 klo 16.11
49 muutosilmoitusta ( näytä )

Tilaa ladataksesi
A-10C Thunderbolt II "Warthog"

1 kokoelmassa, tekijä Tesseractahedron
Tess's Military Vehicles
8 luomusta
Kuvaus
To-scale Fairchild Republic A-10C Thunderbolt II. Armed with 2 x AGM65 Maverick, 2 x AIM9 Sidewinder, 3 x GBU 38 JDAM, 2 x GBU 12, 1 x HYDRA 70 M151, LITENING Targetting Module. In-vehicle FOV of 90 degrees is recommended.

DO NOT REUPLOAD

I am currently reworking all the cockpit controls to be true to the real plane. I have decided to release the reworked version early, but keep in mind that it's very much still a work in progress.

Tutorial:

Fuel valve allows for startup of engines. Turn these on. Also turn on the 'idle' switch to set the throttle to idle. Hold down both compressors until RPS is 0.5 and the jets fire up. Increase the throttle to max and then disable idle. This will allow for the fastest possible takeoff straight out of the hangar.

MFDs will be on while you are in the seat. These MFDs have 5 screens:

1 - Map (W = waypoint set by the keyboard)
2 - LITENING interface (T = tracking, M = manual control with arrow keys, L = laser for guiding in GBU12)
3 - Pylon selection (does not work on right MFD) note: deselection is possible
4 - Vehicle damage interface (will include health indicator too soon)
5 - Unfinished, will include engine and vehicle info
1 kommenttia
ehfdl 26.12.2020 klo 4.30 
it's good!