Feliratkozás a letöltéshez
Boeing 707

Boeing 707 in a Lufthansa livery

This plane is still a WIP. I tried to make it as realistic as possible

Startup Procedure:
1). Outside of the plane, start the GPU
2). Enter the plane, and on the F/E's panel, turn on the battery and exterior power switches
3). Open the fuel cutoffs and turn on the fuel pumps
4). On the pedestal, throttle up to 10 and turn on the engine starters
5). Turn on the four generator breaker (GB) switches
6). To the right of the GB switches, there are two switches labeled GEN 1/2 and GEN 3/4. First, turn on the GEN 1/2 switch and make sure the lights are not flashing. If they are flashing, wait for the RPS of engines 1 and 2 to stabilize. Once the lights have stopped flashing, turn on the GEN breakers for engines 1 and 2.
7). Repeat step 6 for engines 3 and for with the GEN 3/4 switch.
8). Switch the PWR Source from GPU to ENG GEN.
9). Turn on the EN2 and EN3 hydraulic pumps.
10). Turn on the AUX HYD SYS switch.
11). Turn on the EN2/3 bleed air switches and open the left and right hydraulic systems.
12). Release the GPU, and go outside of the plane to make sure the GPU is not in the way of the plane.
13). Go back in the plane.
14). Press the button next to the engine starters to release the thrust spoilers.
15). Press the up key to throttle up.

Credits: jbaker96's yaw damper, wolftheriot's catering tray
if your creation was used and I didn't mention it in the credits, tell me in the comments

check out my other creations
2707: https://steamproxy.net/sharedfiles/filedetails/?id=2176759039
747: https://steamproxy.net/sharedfiles/filedetails/?id=2198897643
777: https://steamproxy.net/sharedfiles/filedetails/?id=2123410485

do not reupload