Stormworks: Build and Rescue

Stormworks: Build and Rescue

Оцінок: 103
AomeAirline AR-42tc Accident Response Training Plane
   
Нагородити
До улюбленого
В улюблених
Прибрати
Розмір файлу
Додано
Оновлено
1.615 MB
10 черв. 2020 о 6:01
4 лип. 2020 о 7:46

Підпишіться, аби завантажити
AomeAirline AR-42tc Accident Response Training Plane

В колекціях (1) автора Aome
- Aome's workshop -
Предметів: 30
Опис
===Introduction===
AR42 series, twin-engine turboprop airliner.
A small passenger plane developed to start the aviation business at Aome Railways.
The most important feature of this aircraft is the ability to train the pilot's ability to respond to accidents by actually causing a machine failure, sensor malfunction, engine stop, etc.
Although it can be operated as a normal passenger plane, various failures and abnormalities can be generated from the "fault simulation console" hidden in the rear wall.
Are you tired of not breaking without hitting?:p

"""In-flight equipment and accident response are not always designed in the same way as in reality"""


6/12
-Improves unstable floor
-Add automatic heater
-Stabilization of behavior

===Startup procedure===
ーWhen flying normallyー
1 Turn on the “main battery” switch, “hydraulic” switch and “cockpit interface”.

2 Turn on EngineStarter, FuelPump, and wait for the engine to start. Turn on the beacon and landing lights.

3 Set the target altitude on the keypad in the center of the cockpit before takeoff. The unit is meters.
Turn on the parking brake cut switch, move to the runway, and take off.

4 When landing, turn on the auto brake behind the throttle and confirm that the lamp lights before landing.
The buzzer will sound when the landing gear is removed while flying at an altitude of 150 m or less.

ーIn emergency training modeー
1 Board the aircraft and inspect the wall between the toilet and the drink server, you will find the console.

2 Turn on the abnormal situation you want to experience from the bottom four of the six panels. You can select multiple items at the same time. Those with (test) are currently in testing and not yet implemented.

3 After making your selection, turn on the emergency training Mode switch in the upper left. The time to failure occurrence is randomly determined and counting starts. If you want to stop halfway, press the reset button.

4 Then return to the cockpit and run "When flying normally".

Currently implemented mode
/Engine blow /Engine abnormal stop /Stop fuel supply /Landing leg inoperative /Altimeter failure /Speed sensor failure /Digital horizontal failure /Partial failure of hydraulic system (test stage) /Power loss (test stage) /Fuel leak /Wing damage (test stage) /Aircraft stabilizer malfunction This is my second time to make an airplane, so I have little experience with it, so please let me know if you have the desired function.

I am a Japanese just starting to study English. Sorry for the hard-to-read sentences. Please let me know if you find any typos or wrong words.

Please let me know if you have any design mistakes. We will fix it immediately.
Коментарів: 52
xXGYATTXx696969 3 листоп. 2022 о 17:35 
Is there a Auto pilot?
xXGYATTXx696969 3 листоп. 2022 о 17:34 
ok now i know how to go up love the plane Aome
xXGYATTXx696969 3 листоп. 2022 о 17:31 
ok i know the throttle now but how the f do i go up
xXGYATTXx696969 3 листоп. 2022 о 17:25 
bruh how do i turn the throttle up
ThatGuy 6 черв. 2022 о 20:59 
It is a bit to fast, could you please fix that?
Jacques de Molay 23 берез. 2022 о 5:01 
Binter Canarias
TheSavageProdigy 23 верес. 2020 о 14:27 
Can I have an engine failure and still be able to fly it?
Lorderock 16 верес. 2020 о 22:47 
How much fuel does it take in Liters????
Tmccanna 14 серп. 2020 о 11:33 
when is the other malfunctions going to be added
TheSavageProdigy 30 черв. 2020 о 8:50 
if you have an electrical failure, can you some how fix it?