Stormworks: Build and Rescue

Stormworks: Build and Rescue

103 평점
AomeAirline AR-42tc Accident Response Training Plane
   
어워드
즐겨찾기
즐겨찾기됨
즐겨찾기 해제
파일 크기
게시일
업데이트일
1.615 MB
2020년 6월 10일 오전 6시 01분
2020년 7월 4일 오전 7시 46분
변경 사항 7개 ( 보기 )

다운로드 위해 구독하기
AomeAirline AR-42tc Accident Response Training Plane

Aome님의 1 모음집
- Aome's workshop -
아이템 30개
설명
===Introduction===
AR42 series, twin-engine turboprop airliner.
A small passenger plane developed to start the aviation business at Aome Railways.
The most important feature of this aircraft is the ability to train the pilot's ability to respond to accidents by actually causing a machine failure, sensor malfunction, engine stop, etc.
Although it can be operated as a normal passenger plane, various failures and abnormalities can be generated from the "fault simulation console" hidden in the rear wall.
Are you tired of not breaking without hitting?:p

"""In-flight equipment and accident response are not always designed in the same way as in reality"""


6/12
-Improves unstable floor
-Add automatic heater
-Stabilization of behavior

===Startup procedure===
ーWhen flying normallyー
1 Turn on the “main battery” switch, “hydraulic” switch and “cockpit interface”.

2 Turn on EngineStarter, FuelPump, and wait for the engine to start. Turn on the beacon and landing lights.

3 Set the target altitude on the keypad in the center of the cockpit before takeoff. The unit is meters.
Turn on the parking brake cut switch, move to the runway, and take off.

4 When landing, turn on the auto brake behind the throttle and confirm that the lamp lights before landing.
The buzzer will sound when the landing gear is removed while flying at an altitude of 150 m or less.

ーIn emergency training modeー
1 Board the aircraft and inspect the wall between the toilet and the drink server, you will find the console.

2 Turn on the abnormal situation you want to experience from the bottom four of the six panels. You can select multiple items at the same time. Those with (test) are currently in testing and not yet implemented.

3 After making your selection, turn on the emergency training Mode switch in the upper left. The time to failure occurrence is randomly determined and counting starts. If you want to stop halfway, press the reset button.

4 Then return to the cockpit and run "When flying normally".

Currently implemented mode
/Engine blow /Engine abnormal stop /Stop fuel supply /Landing leg inoperative /Altimeter failure /Speed sensor failure /Digital horizontal failure /Partial failure of hydraulic system (test stage) /Power loss (test stage) /Fuel leak /Wing damage (test stage) /Aircraft stabilizer malfunction This is my second time to make an airplane, so I have little experience with it, so please let me know if you have the desired function.

I am a Japanese just starting to study English. Sorry for the hard-to-read sentences. Please let me know if you find any typos or wrong words.

Please let me know if you have any design mistakes. We will fix it immediately.
댓글 52
xXGYATTXx696969 2022년 11월 3일 오후 5시 35분 
Is there a Auto pilot?
xXGYATTXx696969 2022년 11월 3일 오후 5시 34분 
ok now i know how to go up love the plane Aome
xXGYATTXx696969 2022년 11월 3일 오후 5시 31분 
ok i know the throttle now but how the f do i go up
xXGYATTXx696969 2022년 11월 3일 오후 5시 25분 
bruh how do i turn the throttle up
ThatGuy 2022년 6월 6일 오후 8시 59분 
It is a bit to fast, could you please fix that?
Jacques de Molay 2022년 3월 23일 오전 5시 01분 
Binter Canarias
TheSavageProdigy 2020년 9월 23일 오후 2시 27분 
Can I have an engine failure and still be able to fly it?
Lorderock 2020년 9월 16일 오후 10시 47분 
How much fuel does it take in Liters????
Tmccanna 2020년 8월 14일 오전 11시 33분 
when is the other malfunctions going to be added
TheSavageProdigy 2020년 6월 30일 오전 8시 50분 
if you have an electrical failure, can you some how fix it?