Stormworks: Build and Rescue

Stormworks: Build and Rescue

十分な評価がありません
ACI Thermostat Microcontroller MK2
   
アワード
お気に入り
お気に入り
お気に入りから削除
Microcontrollers: Composite, Microcontroller
タグ: v0.10.15
ファイルサイズ
投稿日
更新日
35.472 KB
2020年1月4日 8時52分
2020年4月24日 18時26分
3 項目の変更履歴 ( 表示 )

サブスクライブしてダウンロード
ACI Thermostat Microcontroller MK2

解説
This thermostat will provide a digital readout of the current temperature and the set temperature. It will also enter a warning mode if the temperature raises above 32°C.

An uncontrolled heater can go all the way up to about 64.94°C which is about 148.89°F. "...(32˚ and 40˚C), you can experience heat cramps and exhaustion. Between 105˚ and 130˚F (40˚ and 54˚C), heat exhaustion is more likely.," (source: Healthline[www.healthline.com]).

This thermostat has a limit between 10° and 30°C.

70°F is about 21°C

Installation instructions
• Control panel 1:
Push button 1 is temperature raise. This will raise the temperature.
Push button 2 is temperature lower. This will lower the temperature.
• Control panel 2:
Flip-switch/toggle button 3 is the thermostat power switch. This turns the thermostat on or off.
Flip-switch/toggle button 4 is the "display temperature" button. This switches to room temperature display.
• Control panel display output:
Seven-segment 1 is the single digit (eg 1).
Seven-segment 2 is the double digit (eg 20).