Stormworks: Build and Rescue

Stormworks: Build and Rescue

Няма достатъчно оценки
IDT SinumX - Self Driving Bus
   
Награда
Добавяне към любими
В любими
Премахване от любими
Тагове: v0.8.20
Размер на файла
Публикуван на
Обновен на
631.942 KB
3 септ. 2019 в 13:30
4 септ. 2019 в 5:50
4 бележки за промени ( преглед )

Абониране, за да се свали
IDT SinumX - Self Driving Bus

Описание
The SinumX is a AI bus made for use as an autonomous shuttle. It can be programmed using the provided display module featuring an interactrive and user friendly programming system.

-- User Instructions --
-> Using the Sinum
The SinumX is easily operated using a single key located within the passenger compartmend. This key is used to enable/disable the AI. If enabled the SinumX will continuously drive on its route. If disabled the SinumX will park at its TERMINAL station.
The SinumX will only leave its terminal station if the AI is enabled AND the batteries are fully charged. The batteries charge automatically through the Sinums solar panels or can be manually charged through the C port on the right side of the bus.

-> Driving the SinumX
The SinumX can be manually controlled using the provided Sinum Terminal Module.
1. Connect the Sinum Terminal to the C port on the right side of the bus.
2. The screen will now display basic drive controls
3. Disconnect the terminal module

-> Programmingthe SinumX
The SinumX is programmed using the provided Sinum Terminal Module.
1. Connect the Sinum Terminal to the C port on the right side of the bus.
2. Tap "Program Sequence" -- The current location of the bus will be recorded as the Terminal station. (preferably with sunlight access for solar charging)
3. You can now move the map around using the on screen controls or simply by tapping the desired location on the map. On the top right of the screen there are options for setting waypoints and stations which are always set at the curser located in the center of the screen. (the indicator on the top left of the screen shows how much of the sinums internal memory is already filled)
4. Once you have completed your bus route ensure that the way from the last waypoint to the Terminal station is clear and press (the sinum software will automatically close the circuit)
5. Tap "Finish Programming" to apply your changes.
6. The Terminal module can now be removed

--- Credits ---
Sinum Vehicle:
Inno_Creeper

Sinum AI and Touch Interface:
innosteve
21 коментара
nikikamof01 29 юни 2021 в 21:26 
yes yes
innosteve  [автор] 29 юни 2021 в 9:34 
@nikikamof01 I mean the controller is very inefficiently done and a similar result could be achieved much easier using simple LUA scripting (which I might do in the future) but if you think this controller helps you then go for it. Just put credits if you release the creation.
nikikamof01 28 юни 2021 в 23:40 
is it okay to use the micro controller for my bolo mk vi?
innosteve  [автор] 31 май 2021 в 7:51 
@CamoTheKoala
Great to hear. I dont remember when I tested it the last time XD
CamoTheKoala 30 май 2021 в 16:09 
very good still :D
Gino Odjick 31 юли 2020 в 2:31 
coooooooooooooooooooool
Mr Lennyn 6 май 2020 в 13:08 
This is mind-blowing.
Jäger 21 апр. 2020 в 12:50 
Many thanks! By the way: would it be okay if I add you on Steam?
innosteve  [автор] 21 апр. 2020 в 12:43 
@Distanz Jaeger[UC1] Sure feel free to do so. If you credit me in the description or put me in as a co creator I'm fine.
However the chip is not made to be tweaked that much. Let me know if you need any help.
Jäger 21 апр. 2020 в 12:37 
Hey, I wanted to ask if we can use your micro controller for one of our projects. If you want, we can also write privately (via steam)