商店頁面
Stormworks: Build and Rescue
全部 討論區 螢幕擷圖 藝術作品 實況直播 影片 工作坊 新聞 指南 評論

Stormworks: Build and Rescue

商店頁面
Stormworks: Build and Rescue >  工作坊 > Chickensaur 的工作坊
評價次數不足
Auto-Anchor
介紹 討論區0 留言4 更新註記
   
獎勵
加入最愛
已加入最愛
移除最愛
Vehicles: Sea
Microcontrollers: Microcontroller
標籤： v1.11.8
檔案大小
發佈於
更新時間
19.205 KB
2019 年 7 月 16 日 上午 1:00
8 月 11 日 下午 3:50
2 項更新註記 （檢視）
建立者
Chickensaur
離線
查看 Chickensaur 與其他人建立的所有 11 個收藏（有些可能設為隱藏）
1,088 不重複訪客人數
665 目前訂閱人數
10 目前最愛人數

訂閱以下載
Auto-Anchor

在 Chickensaur 的 1 個收藏中
Chickensaur's Contraptions
45 個項目
描述
To Setup:
Connect "Toggle Up/Down" input node on the controller to a toggle button.
Connect "Is Mag-All Connected" input node on the controller to the "Connected" output node on a Mag-all.
Connect "Cable Length of Winch" input node on the controller to the "Cable Length" output node on a winch.
Connect "Cable Up" and "Cable Down" output nodes on the controller to their respective input nodes on a winch.
Connect "Magnet Toggle" output node on the controller to "Magnet Toggle" input node on a Mag-all

Parameters:
Idle height: Length of the Cable when the Anchor is up
Deadzone: Cable length before which the mag-all will not be on. Eg if Deadzone is set to 3, the mag-all will not turn on until the winch unwinds 3.1m. Set this high enough to prevent the mag all attaching to your own hull, but low enough so it grabs the ocean floor once it has cleared your hull.

Note Mag-All Connected and Mag-All Connect signals MUST BE sent through the winch. Example

Everything of mine that isn't a collab is free to use and re-upload, credit is appreciated but not necessary. Enjoy!
4 則留言
< >
Chickensaur  [作者] 2022 年 4 月 20 日 下午 6:51 
it should stop doing that automatically, ensure the connected signal is getting to the MC, it needs to be run into the cable anchor and out the winch
The Derper 2022 年 4 月 20 日 下午 6:50 
Is there a way to make it so the winch will stop letting out cable once the magnet connects to something?
ecwskier 2021 年 2 月 24 日 下午 2:15 
how do i send the connected on the mag all through the winch
LittleGroove 2020 年 12 月 19 日 上午 2:19 
Works great, using this for a deep sea anchor that hides under a sealed door, able to have it open the door when up or down is on for the MC and lock the door when its closed so Im happy to see logic work out super easy in this case to add things onto it