Página de la tienda
Stormworks: Build and Rescue
Todo Discusiones Capturas Artwork Retransmisiones Vídeos Workshop Noticias Guías Reseñas

Stormworks: Build and Rescue

Página de la tienda
Stormworks: Build and Rescue >  Workshop > Workshop de Chickensaur
No hay suficientes valoraciones
Auto-Anchor
Descripción Discusiones0 Comentarios4 Notas sobre cambios
   
Premiar
Favoritos
Favorito
Quitar
Vehicles: Sea
Microcontrollers: Microcontroller
Etiquetas: v1.11.8
Tamaño
Publicado el
Actualizado el
19.205 KB
16 JUL 2019 a las 1:00
11 AGO a las 15:50
2 notas sobre cambios ( ver )
Creado por
Chickensaur
Sin conexión
Ver las 11 colecciones creadas por Chickensaur y otros (algunas podrían estar ocultas)
1,088 Visitantes únicos
665 Suscriptores actuales
10 Favoritos actuales

Suscríbete para descargar
Auto-Anchor

En 1 colección creada por Chickensaur
Chickensaur's Contraptions
45 artículos
Descripción
To Setup:
Connect "Toggle Up/Down" input node on the controller to a toggle button.
Connect "Is Mag-All Connected" input node on the controller to the "Connected" output node on a Mag-all.
Connect "Cable Length of Winch" input node on the controller to the "Cable Length" output node on a winch.
Connect "Cable Up" and "Cable Down" output nodes on the controller to their respective input nodes on a winch.
Connect "Magnet Toggle" output node on the controller to "Magnet Toggle" input node on a Mag-all

Parameters:
Idle height: Length of the Cable when the Anchor is up
Deadzone: Cable length before which the mag-all will not be on. Eg if Deadzone is set to 3, the mag-all will not turn on until the winch unwinds 3.1m. Set this high enough to prevent the mag all attaching to your own hull, but low enough so it grabs the ocean floor once it has cleared your hull.

Note Mag-All Connected and Mag-All Connect signals MUST BE sent through the winch. Example

Everything of mine that isn't a collab is free to use and re-upload, credit is appreciated but not necessary. Enjoy!
4 comentarios
< >
Chickensaur  [autor] 20 ABR 2022 a las 18:51 
it should stop doing that automatically, ensure the connected signal is getting to the MC, it needs to be run into the cable anchor and out the winch
The Derper 20 ABR 2022 a las 18:50 
Is there a way to make it so the winch will stop letting out cable once the magnet connects to something?
ecwskier 24 FEB 2021 a las 14:15 
how do i send the connected on the mag all through the winch
LittleGroove 19 DIC 2020 a las 2:19 
Works great, using this for a deep sea anchor that hides under a sealed door, able to have it open the door when up or down is on for the MC and lock the door when its closed so Im happy to see logic work out super easy in this case to add things onto it