Abonneren om te downloaden
CH-47 Chinook

Navy CH-47 Chinook

Medium to large sized helicopter based of the CH-47. The Boeing CH-47 Chinook is an American twin-engine, tandem rotor, heavy-lift helicopter developed by American rotorcraft company Vertol and manufactured by Boeing Vertol. The CH-47 is among the heaviest lifting Western helicopters.

Great helicopter for exploration and missions as it can lift heavy loads and travel very fast while cruising using autopilot.

The helicopter was designed for use in conjunction with my "WIP" Frigate as pictured in several screenshots along with my "WIP" AOR class ship. This helicopter would be used to transport large cargo between shore and a vessel or alternatively between vessels themselves with the helicopter being stored on deck.

Features:

- Max Speed 110+Mph.
- Auto Pilot.
- Auto-Hover.
- Altitude Select and Hold.
- 1 x Small Winch with a Connector Mag on a rail system located in Cargo Cabin for either lifting cargo or one of two harnesses located in the cabin.
- 3 x Small Winches with Connector Mags located beneath the helicopter. Intended to carry large loads.
- Fuel Connector (Ready for Hardcore mode).
- 5 x Passenger Seats located in rear cabin.
- 2 x Rescue Harnesses.
- 1 x Rear Cargo door for loading and off-loading of large cargo and rescue missions.
- Advance Wind Gauges (Wind Speed, Headwind, Crosswind).

Instructions:

To Fly:
- Open doors of the cabin or main cabin doors and jump in the pilot seat.
- Engage both engines and start them.
- Engines Throttle will be set to 60% by default (Can be change using throttle in cockpit for heavier loads).
- Default control apply for here on out, W/S-Pitch, A/D-Roll, Left/Right-Yaw, Up/Down-Collective.

To Hover at a desired altitude:
- Input the desired altitude into the single keypad.
- Toggle the Altitude hold Button in cockpit next to the keypad.
- This will automatically activate auto hover on the Gyro.
- The helicopter will now maintain that set altitude.

To use the Auto Pilot System:
- Input 1st Way-point Coordinates.
- Input 2nd Way-point Coordinates.
- Input Desired Cruising Altitude.
- Toggle Autopilot button.
- Sit back and relax (The helicopter will automatically fly to your desired way-point).
- The system will reach its top speed of 110kmph.
- The system will automatically try to avoid mountains in your way.
- Switch way-point locations to travel to your next destination.

Cabin Controls:
- Navigation Lights.
- Gauge Lights.
- Cabin Lights.
- Front Landing Lights
- Landing Gear Brakes (Will be enabled by default)
- Auto Pilot
- Toggle Way-point Locations
- Auto Hover
- Altitude Hover
- Engines Throttle


As always please comment and report any bugs you find.

I will keep this creation updated where possible and be sure to keep a look out for my upcoming creations!!!!!!!!

Please do not re-upload or share without my permission, including custom versions!!!!

Original autopilot system by TT found here: https://steamproxy.net/sharedfiles/filedetails/?id=1458582649

Original logic for wind system by Tajin found here: https://steamproxy.net/sharedfiles/filedetails/?id=1446410700

Cargo seen in screenshot can be found here: https://steamproxy.net/workshop/filedetails/?id=1398659572

And lastly have fun.

Dont Forget to click the "Follow" button for future updates!!!!!!!!!!!!!