Stormworks: Build and Rescue

Stormworks: Build and Rescue

Ikke nok vurderinger
Thunderbird 1 [Release!]
   
Utmerkelse
Favoritt
Favoritter
Fjern som favoritt
Filstørrelse
Lagt ut
Oppdatert
866.129 KB
17. apr. 2018 kl. 13.36
27. apr. 2018 kl. 21.13
3 endringslogger ( vis )

Abonner for å laste ned
Thunderbird 1 [Release!]

Beskrivelse
This is Thunderbird 1.

CONTROLS ARE NOW LISTED IN THE SEAT,

Startup Procedure:

Board aircraft.
Prime Systems and Start Engines
Wait 2 seconds, activate altitude hold.
Stow Landing Gear
Press W to fly out of the hangar.

This project took months to complete, but due to a recent update, the base of the design started to work.
Maximum speed is around 38 m/s.

Very proud of this.

If the back segment does not rotate, it's a bad spawn. Nothing I can do about it. Respawn the vehicle. It also has a tendency to flip sometimes, depending on how you fly. Don't raise the landing gear before you are in the air. It will cause the aircraft to flip.

NOTE: It cannot take-off at 60%+ winds.
19 kommentarer
SCP 7. aug. 2021 kl. 15.01 
@Felexl It's broken, that's why.
Felexl 5. aug. 2021 kl. 7.12 
u cant get in it
SCP 28. feb. 2021 kl. 12.00 
It's broken unfortunately
glitchy_red24 27. feb. 2021 kl. 13.56 
it wont start for me
Ghost  [skaper] 24. feb. 2021 kl. 21.31 
I badly want to try the TB1 from the new series, but I’ve caught myself up with another project.
joe_frearson 21. feb. 2021 kl. 2.20 
I had a go and tried to get it near the cgi series one so it was more useful and could do more but i couldn't get the flight figured out, I used jet engines though. I've been meaning to try these fans but powered by jet engines but haven't gotten around to it yet.
Ghost  [skaper] 7. nov. 2020 kl. 12.51 
This would need a complete redesign. I love TB1, but not so sure about this rendition of it anymore.
almil53 6. nov. 2020 kl. 21.02 
do you ever plan to try to remake thunderbird 1 to be able to work with the latest update?
SCP 17. mai 2020 kl. 9.40 
I have done more research and testing, after a few "modifications", I have found that it isn't actually the landing gear, but one of the fans inside. After completely "removing" the back landing gears, TB1 still pushed itself over onto its side because of a fan breaking and causing it to freak out. I am guessing an update caused this issue to occur so fans cannot be used.
SCP 8. mai 2020 kl. 10.46 
I believe I found the issue, on spawn, one of the back landing gears doesnt rotate correctly and causes it to flip on spawn, land or water, this is an issue, as later on, it clips into the hull and causes it to spin out of control, well, thats what I think is going on. I am not a "build" guy so if anyone can fix that, that would be greatly appreciated