Empyrion - Galactic Survival

Empyrion - Galactic Survival

No hay suficientes valoraciones
Sprouts' CCv1 F-Series
   
Premio
Favoritos
Favorito
Quitar
Blueprint: Capital Vessel
Etiquetas: Blueprint
Tamaño
Publicado el
40.804 KB
22 NOV 2017 a las 7:00 a. m.
1 nota sobre cambios ( ver )

Suscríbete para descargar
Sprouts' CCv1 F-Series

Descripción
SPROUTS' Customizable Carrier v.1 Fathom-Series

I've taken the original CustomizableCarrier v.1 published by SPROUTS and gave it an extensive overhaul, which has resulted in a larger and beefier version with more space to customize with. It has all of the same capabilities as the original and mostly maintains the original aesthetic. The changes are as follows.

-The biggest change was the addition of both a warp core and warp fuel tank for interplanetary travel.
-I widened the whole ship by 1 block. Which opened up the main corridor, allowing for corridor lighting, centered the core and cockpit, and add a passenger seat.
-I lengthened the ship by 9 blocks. This adds a whole new section to the ship, allowing you to place amenities and cargo containers into two 2x2x2 spaces and two 3x1x1 spaces. I've uploaded pictures of the spaces and alternate ways to decorate them. There are also 4 available blocks in the head of the ship, ideal for additional seating or whatever else you need.
-The top deck spaces reserved for cargo boxes and the like have been sunken into the ship's haul for their protection. Six 4x1x1 spaces are accessible through twin shutters. Combined with the available spaces mentioned above, there are a total of 54 empty block spaces to play with.
-I reworked the entry points so that you can now go from the ground to either the top deck or lower deck directly. As a result, the ship's lower deck is now oxygenated! I added 2 more entry points to the rear of the ship, making it easier to get onto the ship and around it. I also added motion sensors to the ramps.
-I've slightly changed the appearance of the caps SPROUTS had in place as markers for turrets and guns. The solid textured blocks on the sides of the ship can be removed to add turrets. The solid textured caps on the front underside can be replaced with guns.

As SPROUTS mentioned in his original design, you can add ramps at the ends of the ship that go all the way to the ground if you require HV access. Enjoy.

(Up-to-date with Version 7.3.2)