Place the rope on a flat surface in the shape of the letter "C." Find a durable rope that is at least three feet long.

Form an "S" shape with the rope. Leave the lead of the rope (the bottom part of the "S") long so that you can tie it to something when you've made the noose.

Compress the "S" shape. Compress the "S" shape until all three rows of rope are nearly on top of each other, with only a few inches in between them.

Pinch the three lines of rope together in the middle. Pinch them tightly until the ends fan out to create a bow-tie effect.


Take the top of the original "C" and wrap it around the pinched space. Wrap it from the right side to the left, leaving about three to four inches of the rope unwrapped. You should be left with a loop and a string on the left end, and just a loop on the right end of the "bow tie."


Poke the end of the rope through the top of the loop left by the "S".


Pinch the coiled part of the rope. Use your thumb to hold down the short piece of rope that you just worked through the loop on the left-hand side so it bends over the loop.

Pull the loop on the right-hand side of the bow until it closes the loop on the left. If this part of the loop begins to pull on the free rope instead of the loop, pull on the other side of the bow.


Adjust the noose. Adjust the noose until the coils look nice and tight and the loop is the size you wanted.

Use the noose wisely.