Halaman Toko
Portal 2
Semua Diskusi Screenshot Ilustrasi Siaran Video Workshop Berita Panduan Ulasan
Portal 2 >  Workshop > Workshop N-Sunderland
Tidak cukup rating
Simplified Binary Output System
Deskripsi Diskusi0 Komentar19 Catatan Perubahan
   
Penghargaan
Favorit
Difavoritkan
Batalkan favorit
Singleplayer
Tag: Button, Weighted Cube, Flip Panel, Laser Emitter, Laser Catcher, Glass
Ukuran File
Diposting
Diperbarui
6.126 MB
5 Agu 2012 @ 3:40pm
17 Agu 2012 @ 8:43am
3 Catatan Perubahan ( lihat )
Dibuat oleh
N-Sunderland
Offline
20 Pengunjung Unik
26 Pelanggan Saat Ini
1 Favorit Saat Ini

Berlangganan untuk mengunduh
Simplified Binary Output System

Dalam koleksi 1 dari N-Sunderland
Complex Contraptions
Item 18
Deskripsi
Here's a simplified binary number system. It only requires eight lasers, meaning that it can be incorporated into test chambers without sending them soaring over the item limit.

The mechanism that operates it is extremely simple. As you can see, there are four buttons. From left to right, they represent 1000 (8), 0100 (4), 0010 (2) and 0001 (1). The buttons are connected to two lasers each. One represents zero, the other one represents one. The "0" laser starts enabled, and its catcher connects to every number (represented by a flip panel) with a zero in the place value in question. The "1" laser starts disabled, and connects to every number with a one in that place value. So if the input is 1001, then only flip panel nine will activate. Flip panel one won't activate as the zero laser for the "8" place value will be deactivated. This system ensures that only the correct laser will be on at a given time.

Yes, I removed the connection lines. There are sixty eight of them. Trust me, they're useless here.
19 Komentar
< >
wormsquiggle 25 Agu 2012 @ 11:26pm 
Ahh, i see. Fair enough :)
N-Sunderland  [pembuat] 24 Agu 2012 @ 11:18am 
Ok, don't worry about it :)
cyron43 24 Agu 2012 @ 11:13am 
I did not assume that you did that by mistake. I said I didn't come across this issue and so I didn't know it exists.
N-Sunderland  [pembuat] 24 Agu 2012 @ 11:02am 
My feelings weren't hurt at all. I was merely noting that that's not the kind of mistake that I would make.
cyron43 24 Agu 2012 @ 11:00am 
No need to have your feelings hurt, Nick.
N-Sunderland  [pembuat] 24 Agu 2012 @ 10:47am 
At this point, you should know that I would never make a blatant oversight like that :)
cyron43 24 Agu 2012 @ 10:46am 
So THAT'S why. I was wondering why you used the 1-lasers. :-)
I have only done 3-digit circuits yet. So it's no wonder I haven't come across this issue.
N-Sunderland  [pembuat] 24 Agu 2012 @ 10:37am 
If buttons could handle more connections, then it could be done with four lasers. I had to use eight since there are eight "1" connecttions per button, plus the "0" laser. Since there are only eight connections per item, I added the "1" lasers.
wormsquiggle 24 Agu 2012 @ 10:32am 
Nicely done. After looking at it i noticed that this could be done with only 4 lasers. I assume you used 8 for clarity?
cyron43 17 Agu 2012 @ 8:50am 
I experienced the same with my "Gizmos" map. I just made the room not portable in order to avoid exploits but I couldn't compile it. Maybe BEEmod is responsible for that (but I don't even use BEEmod elements in that map).